tynsel tries to be a space- and time-efficient software modem allowing data to be transmitted and received by 300-baud FSK using the Bell 103 dataset. This is an obsolete technology from the 1980s, and is not meant to be used in new projects, but it could in principle be used to enable the use of ancient hardware.
Before you use tynsel, look at minimodem instead; it is much more capable software than tynsel.
This code is intentionally written to fit in an AVR ATTINY412 microcontroller and therefore to use less than 256 bytes of RAM and 4KiB of program space.
The (non-working) implementation in the avr-top binary allows for manual checking that the program size is appropriately small. The (working) UNIX implementation in the gen and listen binaries can interact with the physical (audio) world via tools like SoX, as shown in examples below.
Someday, the tynsel software might be hosted within a hardware design like soylent.
Unless you are building for an AVR target like the ATTINY412, you probably want to build just the gen and listen targets:
make gen listen
The gen binary takes ASCII data on stdin and produces raw monoaural audio on stdout as 16-bit signed integers at 8000Hz by default. The listen binary does the reverse, so they can be chained together, as illustrated in the examples below.
Until more documentation is written, you can get an idea of the available options by reviewing the parse_opts functions in src/gen.c and src/listen.c.
The following command will emit "hello":
echo "hello" | ./gen | ./listen
You can listen to the output using SoX's play command:
echo "hello, world" | ./gen |
play --rate 8000 --encoding signed --bits 16 --type raw -
By default, gen produces produces only enough samples to represent its input, plus a bit of carrier padding at the beginning and end of transmission.
You can use gen to generate data in real time, using the -r 1 option; in this case, input received from the keyboard will be translated and played out your default sound device:
./gen -r 1 |
play --rate 8000 --encoding signed --bits 16 --type raw --no-show-progress -