This product is a plug-and-play RF module that operates with the Digi XBee SMT line. This unit works with all XBee SMT Pad modules, standard and Pro version. Design consists of an XBee® SX 868 module and USB-to-UART converter that allows users to simply plug the module into their smartphone over USB-C cable.
Additional on-board LED indication for TX/RX data, RSSI level and power (5V) in FT231XQ-R version. Reset tactile button allows rebooting the RF module when needed.
- /Hardware - All Eagle design files (.brd, .sch)
- /Production - Test bed files and production panel files
- Dimensions: 26 x 53 mm
- USB - UART bridge: FT231XQ-R or XR21V1410
- RF module: XB8X-DMUS-001 or XBP9X-DMUS-001 or another XBee SX module
- Input voltage: 5V (USB)
- Logic of UART signal: 3.3V
/FT231XQ-R version:
- /Step 1 - PCB Manufacturing (Gerber files, NC Drill, PCB specs)
- /Step 2 - Board Assembly (Pick & Place, Assembly drawing, 3DPDF, BOM)
- /Step 3 - 3D (3DPDF, STEP 3D)
- /Step 4 - Schematic (PDF schematic)
- /Step 5 - Source Files (source design in Altium Designer)
/XR21V1410 version:
- /Step 1 - PCB Manufacturing (Gerber files, NC Drill, PCB specs)
- /Step 2 - Board Assembly (Pick & Place, Assembly drawing, 3DPDF, BOM)
- /Step 3 - 3D (3DPDF, STEP 3D)
- /Step 4 - Schematic (PDF schematic)
- /Step 5 - Source Files (source design in Altium Designer)
REV1.0 - first design revision
The hardware is released under Creative Commons ShareAlike 4.0 International. All other trademarks, service marks and company names are the property of their respective owners.
Distributed as-is; no warranty is given.