sphinxpackageboxes.sty

%% COLOURED BOXES
%
% change this info string if making any custom modification
\ProvidesPackage{sphinxpackageboxes}[2023/03/07 v6.2.0 advanced colored boxes]
% Optionally executes \RequirePackage for:
%
% - pict2e.  Ideally we would like to use the v0.4a 2020/08/16 release of this
%   package as it allows dimensional arguments to its \moveto, \lineto, etc...
%   Or we could use extra package "picture".  We opt for custom wrappers
%   \spx@moveto, \spx@lineto, ..., working with old versions.
%
%   At 6.2.0 refactoring, we do not wait for at begin document to try to load
%   pict2e.  Actually since 6.0.0 the default is for code-blocks to use
%   rounded boxes, and the only reason since then to wait "at begin document"
%   was to check if user had reverted that default and in fact pict2e was not
%   neeeded.  But with \sphinxbox, we can not know for sure even in that case
%   that pict2e is not needed.  And even back then it would have been possible
%   to user to try to employ \sphinxsetup via raw directive in document body
%   and require some rounded corners (which was thus impossible to satisfy).
%   Time to be much simpler and attempt unconditionally to load pict2e
%   immediately.  This will also have advantage that we can use
%   \@ifpackageloaded{pict2e} and not have to query and save its setting later
%   at begin document.
\IfFileExists{pict2e.sty}
   {\RequirePackage{pict2e}}
   {\PackageWarningNoLine{sphinx}{%
     The package pict2e is required for rounded boxes.\MessageBreak
     It does not seem to be available on your system.\MessageBreak
     Options for setting radii will be ignored%
    }%
    % Formerly a \sphinxbuildwarning was issued but if we did that now it
    % would mean that the produced PDF will always have a red banner near its
    % end about pict2e not being avalable if indeed it is not available, even
    % if user has reverted the default and dropped rounded corners.  Formerly
    % the serious warning was done after having checked at begin document that
    % indeed a rounded corner option had been used.  As we drop the check now,
    % let's be more discrete and simply duplicate the earlier warning to make
    % it visible near end of compilation log and console output.
    \AtEndDocument{\PackageWarningNoLine{sphinx}{%
     The package pict2e is required for rounded boxes.\MessageBreak
     As it does not seem to be available on your system,\MessageBreak
     options setting radii have all been ignored}}%
   }%

% Provides box registers \spx@tempboxa, \spx@tempboxb usable in other places
\newbox\spx@tempboxa
\newbox\spx@tempboxb

%%%%%%%%%%%%%%%%
% Internal registers, conditionals, colors to be configured by each caller
% via a preliminary "setup" call
%
\newif\ifspx@boxes@withshadow         
\newif\ifspx@boxes@insetshadow         
\newif\ifspx@boxes@withbackgroundcolor
\newif\ifspx@boxes@withshadowcolor    
\newif\ifspx@boxes@withbordercolor    
%
\newdimen\spx@boxes@border
\newdimen\spx@boxes@border@top
\newdimen\spx@boxes@border@right
\newdimen\spx@boxes@border@bottom
\newdimen\spx@boxes@border@left
%
\newdimen\spx@boxes@padding@top
\newdimen\spx@boxes@padding@right
\newdimen\spx@boxes@padding@bottom
\newdimen\spx@boxes@padding@left
%
\newdimen\spx@boxes@shadow@xoffset
\newdimen\spx@boxes@shadow@yoffset
%
\newdimen\spx@boxes@radius@topleft % only circular arcs, x-radius same as y-radius
\newdimen\spx@boxes@radius@topright
\newdimen\spx@boxes@radius@bottomright
\newdimen\spx@boxes@radius@bottomleft
%
% These colours have to be defined appropriately by the callers, if the
% corresponding booleans are set to true
% spx@boxes@bordercolor
% spx@boxes@backgroundcolor
% spx@boxes@shadowcolor

%%%%%%%%%%%%%%%%
% "setup" macro
%
% It must be called prior to \spx@boxes@fcolorbox for parameters of the latter
% to be initialized.
%
% It also prepares \spx@boxes@fcolorbox to expand to one of
% \spx@boxes@fcolorbox@rectangle or \spx@boxes@fcolorbox@rounded depending on
% the configuration and availability of the pict2e package.
%
% Due to varying conventions regarding Color names (border, background,
% and shadow), they have to be passed as parameters #2, #3, #4.
% The #1 is one of: pre, topic, warning, danger, etc....
\def\spx@boxes@fcolorbox@setup#1#2#3#4{%
  % All right sides expand to non-terminated dimen expressions (except for
  % shadow@xoffset, shadow@yoffset, where the space of EOL terminates <N>sp)
  % The \relax are not strictly needed, except the one before the first
  % \iftrue, but in case some input is "2.5" in place of "2.5pt" they help
  % avoiding LaTeX to issue e.g. some "Missing \begin{document}" error
  % rather than more apt "Illegal unit of measure (pt inserted)."
  \spx@boxes@border@top   \@nameuse{spx@#1@border@top}\relax
  \spx@boxes@border@right \@nameuse{spx@#1@border@right}\relax
  \spx@boxes@border@bottom\@nameuse{spx@#1@border@bottom}\relax
  \spx@boxes@border@left  \@nameuse{spx@#1@border@left}\relax
  \spx@boxes@border       \@nameuse{spx@#1@border}\relax
  %
  \spx@boxes@padding@top   \@nameuse{spx@#1@padding@top}\relax
  \spx@boxes@padding@right \@nameuse{spx@#1@padding@right}\relax
  \spx@boxes@padding@bottom\@nameuse{spx@#1@padding@bottom}\relax
  \spx@boxes@padding@left  \@nameuse{spx@#1@padding@left}\relax
  %
  \spx@boxes@radius@topleft     \@nameuse{spx@#1@radius@topleft}\relax
  \spx@boxes@radius@topright    \@nameuse{spx@#1@radius@topright}\relax
  \spx@boxes@radius@bottomright \@nameuse{spx@#1@radius@bottomright}\relax
  \spx@boxes@radius@bottomleft  \@nameuse{spx@#1@radius@bottomleft}\relax
  %
  \@nameuse{ifspx@#1@withshadow}%
     \spx@boxes@withshadowtrue
     \spx@boxes@shadow@xoffset \@nameuse{spx@#1@shadow@xoffset}\relax
     \spx@boxes@shadow@yoffset \@nameuse{spx@#1@shadow@yoffset}\relax
  \else
     \spx@boxes@withshadowfalse
  \fi
  % not nesting in previous to avoid TeX conditional subtleties
  \@nameuse{ifspx@#1@insetshadow}%
     \spx@boxes@insetshadowtrue
  \else
     \spx@boxes@insetshadowfalse
  \fi
  %
  \@nameuse{ifspx@#1@withbordercolor}%
    \spx@boxes@withbordercolortrue
    \sphinxcolorlet{spx@boxes@bordercolor}{#2}%
  \else
    \spx@boxes@withbordercolorfalse
  \fi
  %
  \@nameuse{ifspx@#1@withbackgroundcolor}%
    \spx@boxes@withbackgroundcolortrue
    \sphinxcolorlet{spx@boxes@backgroundcolor}{#3}%
  \else
    \spx@boxes@withbackgroundcolorfalse
  \fi
  %
  \@nameuse{ifspx@#1@withshadowcolor}%
    \spx@boxes@withshadowcolortrue
    \sphinxcolorlet{spx@boxes@shadowcolor}{#4}%
  \else
    \spx@boxes@withshadowcolorfalse
  \fi
  \spx@boxes@fcolorbox@setup@b
}
\@ifpackageloaded{pict2e}
{%  pict2e is available and loaded
 \def\spx@boxes@fcolorbox@setup@b{%
  \if1% use rounded boxes only if needed and no inset shadow
    \ifdim\spx@boxes@radius@topleft    >\z@0\fi
    \ifdim\spx@boxes@radius@topright   >\z@0\fi
    \ifdim\spx@boxes@radius@bottomright>\z@0\fi
    \ifdim\spx@boxes@radius@bottomleft >\z@0\fi
    1\def\spx@boxes@fcolorbox{\spx@boxes@fcolorbox@rectangle}%
  \else
    \ifspx@boxes@insetshadow
        \def\spx@boxes@fcolorbox{\spx@boxes@fcolorbox@rectangle}%
    \else
        \def\spx@boxes@fcolorbox{\spx@boxes@fcolorbox@rounded}%
    \fi
  \fi
 }% end of definition of setup@b in case of presence of pict2e
}%
{% pict2e could not be loaded, we must always use fcolorbox@rectangle
 \def\spx@boxes@fcolorbox@setup@b{%
    \def\spx@boxes@fcolorbox{\spx@boxes@fcolorbox@rectangle}%
 }% end of definition of setup@b in case of absence of pict2e
}% end of "no pict2e" branch

%%%%%%%%%%%%%%%%
% \sphinxbox (added at 6.2.0)
%
% For an inline box, possibly rounded.
\newcommand\sphinxbox[1][]{% #1 stands for the options, they are... optional!
  \begingroup
    \sphinxboxsetup{#1}% only "box_" options, with no "box_" prefix
    \spx@boxes@fcolorbox@setup
        {box}
        {sphinxboxBorderColor}
        {sphinxboxBgColor}
        {sphinxboxShadowColor}%
    \setbox0\hbox\bgroup\aftergroup\spx@boxes@sphinxbox@a
    \let\next=%
}
\def\spx@boxes@sphinxbox@a{\spx@boxes@fcolorbox{\box\z@}\endgroup}

\newcommand\newsphinxbox[2][]{%
   \newcommand#2[1][]{\sphinxbox[#1,##1]}%
}
\newcommand\renewsphinxbox[2][]{%
   \renewcommand#2[1][]{\sphinxbox[#1,##1]}%
}

%%%%%%%%%%%%%%%%
% MACROS
%
% \spx@boxes@fcolorbox expands either to \spx@boxes@fcolorbox@rectangle
% or \spx@boxes@fcolorbox@rounded depending on preliminary set-up.
% Let's give it some default fall-back:
% (but preliminary "setup" of \spx@boxes@fcolorbox@rectangle parameters
%  is mandatory requirement for it to work) 
\def\spx@boxes@fcolorbox{\spx@boxes@fcolorbox@rectangle}

% Then:
%
% - \spx@boxes@fcolorbox@rectangle (4 padding parameters, 4 border widths, 2 shadow widths,
%   and three colours: background, border and shadow; same as in CSS styling)
%
%   It branches to one of:
%   - \spx@boxes@fcolorbox@externalshadow
%   - \spx@boxes@fcolorbox@insetshadow    (same concept of "inset" as in CSS styling)
%
% - \spx@boxes@fcolorbox@rounded: rounded corners using the picture environment
%   and pict2e package for its low-weight interface to PDF graphics operations

% MEMO: we have also successfully tested usage of tcolorbox.sty (its \tcbox) but
% decided to use pict2e.sty for the following reasons:
% 1- PDF build was observed to be an order of magnitude faster,
% 2- the boxes we can do with pict2e appear to be fancy enough,
%    almost matching what one can see in HTML renderings,
% 2- orders of magnitude smaller dependency (tcolorbox uses the pgf TeX
%    framework), although on Ubuntu it seems texlive-pictures is
%    needed which also contains the whole of pgf/TikZ... so this point
%    is a bit moot...

% For code-blocks, attachements of caption and continuation hints are done
% exactly as prior to extension of Sphinx via this package, whether the box
% has straight or rounded corners.  The vertical space occupied is the same,
% if nothing else is changed (perhaps in future the title itself could be also
% rendered in a rounded box?)

%//// \spx@boxes@fcolorbox@rectangle
% This box will have the same baseline as its argument (which is typeset in
% horizontal mode).  It takes into account four border widths parameters, four
% padding parameters, two shadow widths (each possibly negative), and three
% colors: background, border and shadow.  Its boundary box takes into account
% all of shadow, border and padding.  It is up to the caller to take steps for
% the shadow (and perhaps also border, and padding) to go into margin or stay
% inside the text area, in collaboration with framed.sty.  In usage as a
% "FrameCommand" with framed.sty, the argument will already be a collection
% of TeX boxes (and interline glues).
%
% The customization of the various parameters are under responsability of
% the caller, before expansion of \spx@boxes@fcolorbox.
% An extra hook is provided which is used by \sphinxVerbatim@FirstFrameCommand
% from sphinxlatexliterals.sty and others.
\let\spx@boxes@fcolorbox@setuphook\@empty
%
% The parameters are interpreted as they would as CSS properties.
\long\def\spx@boxes@fcolorbox@rectangle#1{%
  \hbox\bgroup
  \spx@boxes@fcolorbox@setuphook
  \setbox\spx@tempboxa
   \hbox{\kern\dimexpr\spx@boxes@border@left+\spx@boxes@padding@left\relax
         {#1}%
         \kern\dimexpr\spx@boxes@padding@right+\spx@boxes@border@right\relax}%
  \ht\spx@tempboxa
     \dimexpr\ht\spx@tempboxa+\spx@boxes@border@top+\spx@boxes@padding@top\relax
  \dp\spx@tempboxa
     \dimexpr\dp\spx@tempboxa+\spx@boxes@padding@bottom+\spx@boxes@border@bottom\relax
  \ifspx@boxes@insetshadow
     \expandafter\spx@boxes@fcolorbox@insetshadow
  \else
     \expandafter\spx@boxes@fcolorbox@externalshadow
  \fi
}

\def\spx@boxes@fcolorbox@externalshadow{%
  % reserve space to shadow if on left
  \ifspx@boxes@withshadow
    \ifdim\spx@boxes@shadow@xoffset<\z@\kern-\spx@boxes@shadow@xoffset\fi
  \fi
  % BACKGROUND
  % draw background and move back to reference point
  \ifspx@boxes@withbackgroundcolor
   {\color{spx@boxes@backgroundcolor}%
    \vrule\@height\ht\spx@tempboxa
          \@depth\dp\spx@tempboxa
          \@width\wd\spx@tempboxa
    \kern-\wd\spx@tempboxa
    }%
  \fi
  % BOX SHADOW
  % draw shadow and move back to reference point
  \ifspx@boxes@withshadow
  \vbox{%
    \moveright\spx@boxes@shadow@xoffset
    \hbox{\lower\spx@boxes@shadow@yoffset
          \vbox{\ifspx@boxes@withshadowcolor\color{spx@boxes@shadowcolor}\fi
                \ifdim\spx@boxes@shadow@yoffset<\z@
                  \hrule\@height-\spx@boxes@shadow@yoffset
                  \kern\spx@boxes@shadow@yoffset
                \fi
                \setbox\spx@tempboxb\hb@xt@\wd\spx@tempboxa{%
                 \ifdim\spx@boxes@shadow@xoffset<\z@\vrule\@width-\spx@boxes@shadow@xoffset\fi
                 \hss
                 \ifdim\spx@boxes@shadow@xoffset>\z@\vrule\@width\spx@boxes@shadow@xoffset\fi
                 }%
                \ht\spx@tempboxb\ht\spx@tempboxa
                \dp\spx@tempboxb\dp\spx@tempboxa
                \box\spx@tempboxb
                \ifdim\spx@boxes@shadow@yoffset>\z@
                  \kern-\spx@boxes@shadow@yoffset
                  \hrule\@height\spx@boxes@shadow@yoffset
                \fi
                \kern-\dp\spx@tempboxa
               }% end of \vbox, attention it will have zero depth if yoffset>0
          \kern-\wd\spx@tempboxa
          \ifdim\spx@boxes@shadow@xoffset>\z@
            \kern-\spx@boxes@shadow@xoffset
          \fi
         }% end of \hbox, attention its depth is only yoffset if yoffset>0
       }% end of \vbox
  \fi % end of shadow drawing, and we are back to horizontal reference point
  % BOX BORDER
  \vbox{\ifspx@boxes@withbordercolor\color{spx@boxes@bordercolor}\fi
        \hrule\@height\spx@boxes@border@top
           \kern-\spx@boxes@border@top
        \setbox\spx@tempboxb\hb@xt@\wd\spx@tempboxa
                  {\vrule\@width\spx@boxes@border@left
                   \hss\vrule\@width\spx@boxes@border@right
                  }%
            \ht\spx@tempboxb\ht\spx@tempboxa
            \dp\spx@tempboxb\dp\spx@tempboxa
        \box\spx@tempboxb
        \kern-\spx@boxes@border@bottom
        \hrule\@height\spx@boxes@border@bottom
        \kern-\dp\spx@tempboxa
       }% attention this box has zero depth due to \hrule at bottom
  % step back to horizontal reference point
  \kern-\wd\spx@tempboxa
  % end of border drawing
  % CONTENTS
  % adjust the total depth to include the bottom shadow
  \ifspx@boxes@withshadow
    \ifdim\spx@boxes@shadow@yoffset>\z@
      \dp\spx@tempboxa\dimexpr\dp\spx@tempboxa+\spx@boxes@shadow@yoffset\relax
    \fi
  \fi
  \box\spx@tempboxa
  % include lateral shadow in total width
  \ifspx@boxes@withshadow
    \ifdim\spx@boxes@shadow@xoffset>\z@\kern\spx@boxes@shadow@xoffset\fi
  \fi
  \egroup
}

%//// \spx@boxes@fcolorbox@insetshadow
% The parameters are interpreted as in CSS styling.
\def\spx@boxes@fcolorbox@insetshadow{%
  % BACKGROUND
  % draw background and move back to reference point
  \ifspx@boxes@withbackgroundcolor
   {\color{spx@boxes@backgroundcolor}%
    \vrule\@height\ht\spx@tempboxa
          \@depth\dp\spx@tempboxa
          \@width\wd\spx@tempboxa
    \kern-\wd\spx@tempboxa
    }%
  \fi
  % BOX SHADOW
  % draw shadow and move back to reference point
  \ifspx@boxes@withshadow
    \hbox{\vbox{\ifspx@boxes@withshadowcolor\color{spx@boxes@shadowcolor}\fi
% NOTA BENE
% We deliberately draw shadow partially under an area later covered by frame
% with the idea to avoid anti-aliasing problems but in fact this may be a bad
% idea with border is thin.
% This may need some extra testing with PDF viewers... reports welcome!
                \ifdim\spx@boxes@shadow@yoffset>\z@
                  \hrule\@height\dimexpr\spx@boxes@border@top+\spx@boxes@shadow@yoffset\relax
                  \kern-\spx@boxes@shadow@yoffset
                  \kern-\spx@boxes@border@top
                \fi
                \setbox\spx@tempboxb\hb@xt@\wd\spx@tempboxa{%
                 \ifdim\spx@boxes@shadow@xoffset>\z@
                  \vrule\@width\dimexpr\spx@boxes@border@left+\spx@boxes@shadow@xoffset\relax\fi
                 \hss
                 \ifdim\spx@boxes@shadow@xoffset<\z@
                  \vrule\@width\dimexpr-\spx@boxes@shadow@xoffset+\spx@boxes@border@right\relax\fi
                 }%
                \ht\spx@tempboxb\ht\spx@tempboxa
                \dp\spx@tempboxb\dp\spx@tempboxa
                \box\spx@tempboxb
                \ifdim\spx@boxes@shadow@yoffset<\z@
                  \kern\spx@boxes@shadow@yoffset
                  \kern-\spx@boxes@border@bottom
                  \hrule\@height\dimexpr-\spx@boxes@shadow@yoffset+\spx@boxes@border@bottom\relax
                \fi
                \kern-\dp\spx@tempboxa
               }% end of \vbox, attention it will have zero depth if yoffset<0
          \kern-\wd\spx@tempboxa
         }% end of \hbox, attention its depth is only |yoffset| if yoffset<0
  \fi % end of inset shadow drawing, and we are back to horizontal reference point
  % BOX BORDER
  \vbox{\ifspx@boxes@withbordercolor\color{spx@boxes@bordercolor}\fi
        \hrule\@height\spx@boxes@border@top
           \kern-\spx@boxes@border@top
        \setbox\spx@tempboxb\hb@xt@\wd\spx@tempboxa
                  {\vrule\@width\spx@boxes@border@left
                   \hss\vrule\@width\spx@boxes@border@right
                  }%
            \ht\spx@tempboxb\ht\spx@tempboxa
            \dp\spx@tempboxb\dp\spx@tempboxa
        \box\spx@tempboxb
        \kern-\spx@boxes@border@bottom
        \hrule\@height\spx@boxes@border@bottom
        \kern-\dp\spx@tempboxa
       }% attention this box has zero depth due to \hrule at bottom
  % step back to horizontal reference point
  \kern-\wd\spx@tempboxa
  % end of border drawing
  % CONTENTS
  \box\spx@tempboxa
  \egroup
}

% let's abort input if pict2e package could not be loaded.
% To be extra safe we also alias @rounded to @rectangle but
% a priori the architecture is done so that @rounded will never
% be called in that case by other Sphinx LaTeX components.
\@ifpackageloaded{pict2e}
  {}
  {\def\spx@boxes@fcolorbox@rounded{\spx@boxes@fcolorbox@rectangle}%
   \endinput
  }

% we proceed now in the context of pict2e being available and loaded
% (TeX being a macro-expansion based language it would have
%  swallowed all the coming definitions even if pict2e
%  had in fact not been loaded... but we aborted the input above)
%%%%%%%%
% \spx@boxes@fcolorbox@rounded
%
% Various radii but only one border-width parameter.
% Shadow too.

% wrappers for pict2e usage if old
% Better not to copy over 2020 pict2e definitions in case
% something internal changes
% However our wrappers will work ONLY with dimensional inputs
% No need to pre-expand the arguments
% Braces in case the expression uses parentheses
\def\spx@moveto(#1,#2){\moveto({\strip@pt\dimexpr#1\relax},{\strip@pt\dimexpr#2\relax})}
\def\spx@lineto(#1,#2){\lineto({\strip@pt\dimexpr#1\relax},{\strip@pt\dimexpr#2\relax})}
% attention here the [N] becomes mandatory
\def\spx@circlearc[#1]#2#3#4%#5#6
   {\circlearc[#1]{\strip@pt\dimexpr#2\relax}%
                  {\strip@pt\dimexpr#3\relax}%
                  {\strip@pt\dimexpr#4\relax}}

% This macro will when executed in a picture environment prepare a path which
% is both used for filling backround color and stroking border
% The coordinate origin in the LaTeX picture environment will be at half the
% border width (d/2, d/2), d = constant border width
\def\spx@boxes@borderpath{%
  \spx@moveto(\spx@boxes@radius@bottomleft,\z@)% \z@ not 0 as our \spx@moveto is quite dumb
  \spx@lineto(\wd\spx@tempboxa-\spx@boxes@border-\spx@boxes@radius@bottomright,\z@)%
  \spx@circlearc[2]{\wd\spx@tempboxa-\spx@boxes@border-\spx@boxes@radius@bottomright}%
                {\spx@boxes@radius@bottomright}%
                {\spx@boxes@radius@bottomright}{-90}{0}%
  \spx@lineto(\wd\spx@tempboxa-\spx@boxes@border,%
              \ht\spx@tempboxa+\dp\spx@tempboxa-\spx@boxes@border-\spx@boxes@radius@topright)%
  \spx@circlearc[2]{\wd\spx@tempboxa-\spx@boxes@border-\spx@boxes@radius@topright}
                {\ht\spx@tempboxa+\dp\spx@tempboxa-\spx@boxes@border-\spx@boxes@radius@topright}%
                {\spx@boxes@radius@topright}{0}{90}%
  \spx@lineto(\spx@boxes@radius@topleft,\ht\spx@tempboxa+\dp\spx@tempboxa-\spx@boxes@border)%
  \spx@circlearc[2]{\spx@boxes@radius@topleft}%
                {\ht\spx@tempboxa+\dp\spx@tempboxa-\spx@boxes@border-\spx@boxes@radius@topleft}%
                {\spx@boxes@radius@topleft}{90}{180}%
  \spx@lineto(\z@,\spx@boxes@radius@bottomleft)%
  \spx@circlearc[2]{\spx@boxes@radius@bottomleft}%
                   {\spx@boxes@radius@bottomleft}%
                   {\spx@boxes@radius@bottomleft}{180}{270}%
}% end of definition of \spx@boxes@borderpath
\def\spx@boxes@borderpath@opentop{%
  \spx@moveto(\z@,\ht\spx@tempboxa+\dp\spx@tempboxa-\spx@boxes@border)%
  \spx@lineto(\z@,\spx@boxes@radius@bottomleft)%
  \spx@circlearc[2]{\spx@boxes@radius@bottomleft}%
                   {\spx@boxes@radius@bottomleft}%
                   {\spx@boxes@radius@bottomleft}{180}{270}%
  \spx@lineto(\wd\spx@tempboxa-\spx@boxes@border-\spx@boxes@radius@bottomright,\z@)%
  \spx@circlearc[2]{\wd\spx@tempboxa-\spx@boxes@border-\spx@boxes@radius@bottomright}%
                {\spx@boxes@radius@bottomright}%
                {\spx@boxes@radius@bottomright}{-90}{0}%
  \spx@lineto(\wd\spx@tempboxa-\spx@boxes@border,%
              \ht\spx@tempboxa+\dp\spx@tempboxa-\spx@boxes@border)%
}% end of definition of \spx@boxes@borderpath@opentop
\def\spx@boxes@borderpath@openbottom{%
  \spx@moveto(\wd\spx@tempboxa-\spx@boxes@border,\z@)%
  \spx@lineto(\wd\spx@tempboxa-\spx@boxes@border,%
              \ht\spx@tempboxa+\dp\spx@tempboxa-\spx@boxes@border-\spx@boxes@radius@topright)%
  \spx@circlearc[2]{\wd\spx@tempboxa-\spx@boxes@border-\spx@boxes@radius@topright}
                {\ht\spx@tempboxa+\dp\spx@tempboxa-\spx@boxes@border-\spx@boxes@radius@topright}%
                {\spx@boxes@radius@topright}{0}{90}%
  \spx@lineto(\spx@boxes@radius@topleft,\ht\spx@tempboxa+\dp\spx@tempboxa-\spx@boxes@border)%
  \spx@circlearc[2]{\spx@boxes@radius@topleft}%
                {\ht\spx@tempboxa+\dp\spx@tempboxa-\spx@boxes@border-\spx@boxes@radius@topleft}%
                {\spx@boxes@radius@topleft}{90}{180}%
  \spx@lineto(\z@,\z@)%
}% end of definition of \spx@boxes@borderpath@openbottom
\def\spx@boxes@borderpath@openboth{%
  \spx@moveto(\wd\spx@tempboxa-\spx@boxes@border,\z@)%
  \spx@lineto(\wd\spx@tempboxa-\spx@boxes@border,%
              \ht\spx@tempboxa+\dp\spx@tempboxa-\spx@boxes@border)%
  \spx@moveto(\z@,\ht\spx@tempboxa+\dp\spx@tempboxa-\spx@boxes@border)%
  \spx@lineto(\z@,\z@)%
}% end of definition of \spx@boxes@borderpath@openboth

\long\def\spx@boxes@fcolorbox@rounded #1{%
  \hbox{%
   \spx@boxes@fcolorbox@setuphook
   % reserve space to shadow if on left
   \ifspx@boxes@withshadow
     \ifdim\spx@boxes@shadow@xoffset<\z@\kern-\spx@boxes@shadow@xoffset\fi
   \fi
   \vbox{%
     % adjust vertical bbox
     \ifspx@boxes@withshadow
       \ifdim\spx@boxes@shadow@yoffset<\z@
           \kern-\spx@boxes@shadow@yoffset
       \fi
     \fi
     \setlength{\unitlength}{1pt}%
     \setbox\spx@tempboxa
     \hbox{\kern\dimexpr\spx@boxes@border+\spx@boxes@padding@left\relax
           {#1}%
           \kern\dimexpr\spx@boxes@padding@right+\spx@boxes@border\relax}%
     \ht\spx@tempboxa
     \dimexpr\ht\spx@tempboxa+\spx@boxes@border+\spx@boxes@padding@top\relax
     \dp\spx@tempboxa
     \dimexpr\dp\spx@tempboxa+\spx@boxes@padding@bottom+\spx@boxes@border\relax
     \hbox{%
   \begin{picture}%
      % \strip@pt\dimexpr to work around "old" LaTeX picture limitation
      % (we could use the "picture" package, this would add another dependency)
      (\strip@pt\wd\spx@tempboxa,\strip@pt\dimexpr\ht\spx@tempboxa+\dp\spx@tempboxa\relax)%
      (\strip@pt\dimexpr-.5\spx@boxes@border\relax,\strip@pt\dimexpr-.5\spx@boxes@border\relax)%
\ifspx@boxes@withshadow
{% <-- added scope limitation at 6.2.0, as shadowcolor was leaking to border if
 % bordercolor not explicitly set
 % Should an \else branch be added with \normalcolor?
             \ifspx@boxes@withshadowcolor\color{spx@boxes@shadowcolor}\fi
              \put(\strip@pt\dimexpr\ifdim\spx@boxes@shadow@xoffset<\z@-\fi
                           0.5\spx@boxes@border+\spx@boxes@shadow@xoffset\relax,%
                   \strip@pt\dimexpr\ifdim\spx@boxes@shadow@yoffset<\z@\else-\fi
                           0.5\spx@boxes@border-\spx@boxes@shadow@yoffset\relax)
                   {\spx@boxes@borderpath\fillpath}%
              {\ifspx@boxes@withbackgroundcolor\else
                   \pagecolor% was using \color{white} prior to 6.2.0
                   \spx@boxes@borderpath\fillpath
              \fi}%
}%
\fi
{\ifspx@boxes@withbackgroundcolor
              \color{spx@boxes@backgroundcolor}%
              \spx@boxes@borderpath\fillpath
\fi}%
\ifdim\spx@boxes@border>\z@
% even with \spx@boxes@border set to 0pt as done if verbatimwithframe=false
% stroke will produce a visible contour, so we exclude doing it in that case
    \ifspx@boxes@withbordercolor
              \color{spx@boxes@bordercolor}%
% Should an \else branch use \normalcolor?
    \fi
              \linethickness{\spx@boxes@border}%
              \ifdim\spx@boxes@border@top=\z@
                    \ifdim\spx@boxes@border@bottom=\z@
                          \spx@boxes@borderpath@openboth
                    \else \spx@boxes@borderpath@opentop
                    \fi
              \else
              \ifdim\spx@boxes@border@bottom=\z@
                    \spx@boxes@borderpath@openbottom
              \else\spx@boxes@borderpath\strokepath
              \fi\fi
              \strokepath
\fi
   \end{picture}}% end of picture \hbox in \vbox
   % back-up vertically for outputting the contents
   \kern-\dimexpr\ht\spx@tempboxa+\dp\spx@tempboxa\relax
     % adjust vertical bbox
     \ifspx@boxes@withshadow
       \ifdim\spx@boxes@shadow@yoffset>\z@
           \dp\spx@tempboxa\dimexpr\dp\spx@tempboxa+\spx@boxes@shadow@yoffset\relax
       \fi
     \fi
   % inhibit TeX's "line skip" adjustment when piling up hboxes in a vbox
   \nointerlineskip
   \box\spx@tempboxa
   }% end of \vbox
  % include lateral shadow in total width
  \ifspx@boxes@withshadow
    \ifdim\spx@boxes@shadow@xoffset>\z@\kern\spx@boxes@shadow@xoffset\fi
  \fi
  }% end of \hbox
}%


\endinput