colorbar.py

"""
Colorbars are a visualization of the mapping from scalar values to colors.
In Matplotlib they are drawn into a dedicated `~.axes.Axes`.

.. note::
   Colorbars are typically created through `.Figure.colorbar` or its pyplot
   wrapper `.pyplot.colorbar`, which internally use `.Colorbar` together with
   `.make_axes_gridspec` (for `.GridSpec`-positioned axes) or `.make_axes` (for
   non-`.GridSpec`-positioned axes).

   End-users most likely won't need to directly use this module's API.
"""

import logging
import textwrap

import numpy as np

import matplotlib as mpl
from matplotlib import _api, cbook, collections, cm, colors, contour, ticker
import matplotlib.artist as martist
import matplotlib.patches as mpatches
import matplotlib.path as mpath
import matplotlib.scale as mscale
import matplotlib.spines as mspines
import matplotlib.transforms as mtransforms
from matplotlib import _docstring

_log = logging.getLogger(__name__)

_make_axes_kw_doc = """
location : None or {'left', 'right', 'top', 'bottom'}
    The location, relative to the parent axes, where the colorbar axes
    is created.  It also determines the *orientation* of the colorbar
    (colorbars on the left and right are vertical, colorbars at the top
    and bottom are horizontal).  If None, the location will come from the
    *orientation* if it is set (vertical colorbars on the right, horizontal
    ones at the bottom), or default to 'right' if *orientation* is unset.

orientation : None or {'vertical', 'horizontal'}
    The orientation of the colorbar.  It is preferable to set the *location*
    of the colorbar, as that also determines the *orientation*; passing
    incompatible values for *location* and *orientation* raises an exception.

fraction : float, default: 0.15
    Fraction of original axes to use for colorbar.

shrink : float, default: 1.0
    Fraction by which to multiply the size of the colorbar.

aspect : float, default: 20
    Ratio of long to short dimensions.

pad : float, default: 0.05 if vertical, 0.15 if horizontal
    Fraction of original axes between colorbar and new image axes.

anchor : (float, float), optional
    The anchor point of the colorbar axes.
    Defaults to (0.0, 0.5) if vertical; (0.5, 1.0) if horizontal.

panchor : (float, float), or *False*, optional
    The anchor point of the colorbar parent axes. If *False*, the parent
    axes' anchor will be unchanged.
    Defaults to (1.0, 0.5) if vertical; (0.5, 0.0) if horizontal.
"""

_colormap_kw_doc = """
extend : {'neither', 'both', 'min', 'max'}
    Make pointed end(s) for out-of-range values (unless 'neither').  These are
    set for a given colormap using the colormap set_under and set_over methods.

extendfrac : {*None*, 'auto', length, lengths}
    If set to *None*, both the minimum and maximum triangular colorbar
    extensions will have a length of 5% of the interior colorbar length (this
    is the default setting).

    If set to 'auto', makes the triangular colorbar extensions the same lengths
    as the interior boxes (when *spacing* is set to 'uniform') or the same
    lengths as the respective adjacent interior boxes (when *spacing* is set to
    'proportional').

    If a scalar, indicates the length of both the minimum and maximum
    triangular colorbar extensions as a fraction of the interior colorbar
    length.  A two-element sequence of fractions may also be given, indicating
    the lengths of the minimum and maximum colorbar extensions respectively as
    a fraction of the interior colorbar length.

extendrect : bool
    If *False* the minimum and maximum colorbar extensions will be triangular
    (the default).  If *True* the extensions will be rectangular.

spacing : {'uniform', 'proportional'}
    For discrete colorbars (`.BoundaryNorm` or contours), 'uniform' gives each
    color the same space; 'proportional' makes the space proportional to the
    data interval.

ticks : None or list of ticks or Locator
    If None, ticks are determined automatically from the input.

format : None or str or Formatter
    If None, `~.ticker.ScalarFormatter` is used.
    Format strings, e.g., ``"%4.2e"`` or ``"{x:.2e}"``, are supported.
    An alternative `~.ticker.Formatter` may be given instead.

drawedges : bool
    Whether to draw lines at color boundaries.

label : str
    The label on the colorbar's long axis.

boundaries, values : None or a sequence
    If unset, the colormap will be displayed on a 0-1 scale.
    If sequences, *values* must have a length 1 less than *boundaries*.  For
    each region delimited by adjacent entries in *boundaries*, the color mapped
    to the corresponding value in values will be used.
    Normally only useful for indexed colors (i.e. ``norm=NoNorm()``) or other
    unusual circumstances.
"""

_docstring.interpd.update(colorbar_doc="""
Add a colorbar to a plot.

Parameters
----------
mappable
    The `matplotlib.cm.ScalarMappable` (i.e., `~matplotlib.image.AxesImage`,
    `~matplotlib.contour.ContourSet`, etc.) described by this colorbar.
    This argument is mandatory for the `.Figure.colorbar` method but optional
    for the `.pyplot.colorbar` function, which sets the default to the current
    image.

    Note that one can create a `.ScalarMappable` "on-the-fly" to generate
    colorbars not attached to a previously drawn artist, e.g. ::

        fig.colorbar(cm.ScalarMappable(norm=norm, cmap=cmap), ax=ax)

cax : `~matplotlib.axes.Axes`, optional
    Axes into which the colorbar will be drawn.

ax : `~matplotlib.axes.Axes`, list of Axes, optional
    One or more parent axes from which space for a new colorbar axes will be
    stolen, if *cax* is None.  This has no effect if *cax* is set.

use_gridspec : bool, optional
    If *cax* is ``None``, a new *cax* is created as an instance of Axes.  If
    *ax* is an instance of Subplot and *use_gridspec* is ``True``, *cax* is
    created as an instance of Subplot using the :mod:`.gridspec` module.

Returns
-------
colorbar : `~matplotlib.colorbar.Colorbar`

Notes
-----
Additional keyword arguments are of two kinds:

  axes properties:
%s
  colorbar properties:
%s

If *mappable* is a `~.contour.ContourSet`, its *extend* kwarg is included
automatically.

The *shrink* kwarg provides a simple way to scale the colorbar with respect
to the axes. Note that if *cax* is specified, it determines the size of the
colorbar and *shrink* and *aspect* kwargs are ignored.

For more precise control, you can manually specify the positions of
the axes objects in which the mappable and the colorbar are drawn.  In
this case, do not use any of the axes properties kwargs.

It is known that some vector graphics viewers (svg and pdf) renders white gaps
between segments of the colorbar.  This is due to bugs in the viewers, not
Matplotlib.  As a workaround, the colorbar can be rendered with overlapping
segments::

    cbar = colorbar()
    cbar.solids.set_edgecolor("face")
    draw()

However this has negative consequences in other circumstances, e.g. with
semi-transparent images (alpha < 1) and colorbar extensions; therefore, this
workaround is not used by default (see issue #1188).
""" % (textwrap.indent(_make_axes_kw_doc, "    "),
       textwrap.indent(_colormap_kw_doc, "    ")))


def _set_ticks_on_axis_warn(*args, **kwargs):
    # a top level function which gets put in at the axes'
    # set_xticks and set_yticks by Colorbar.__init__.
    _api.warn_external("Use the colorbar set_ticks() method instead.")


class _ColorbarSpine(mspines.Spine):
    def __init__(self, axes):
        self._ax = axes
        super().__init__(axes, 'colorbar',
                         mpath.Path(np.empty((0, 2)), closed=True))
        mpatches.Patch.set_transform(self, axes.transAxes)

    def get_window_extent(self, renderer=None):
        # This Spine has no Axis associated with it, and doesn't need to adjust
        # its location, so we can directly get the window extent from the
        # super-super-class.
        return mpatches.Patch.get_window_extent(self, renderer=renderer)

    def set_xy(self, xy):
        self._path = mpath.Path(xy, closed=True)
        self._xy = xy
        self.stale = True

    def draw(self, renderer):
        ret = mpatches.Patch.draw(self, renderer)
        self.stale = False
        return ret


class _ColorbarAxesLocator:
    """
    Shrink the axes if there are triangular or rectangular extends.
    """
    def __init__(self, cbar):
        self._cbar = cbar
        self._orig_locator = cbar.ax._axes_locator

    def __call__(self, ax, renderer):
        if self._orig_locator is not None:
            pos = self._orig_locator(ax, renderer)
        else:
            pos = ax.get_position(original=True)
        if self._cbar.extend == 'neither':
            return pos

        y, extendlen = self._cbar._proportional_y()
        if not self._cbar._extend_lower():
            extendlen[0] = 0
        if not self._cbar._extend_upper():
            extendlen[1] = 0
        len = sum(extendlen) + 1
        shrink = 1 / len
        offset = extendlen[0] / len
        # we need to reset the aspect ratio of the axes to account
        # of the extends...
        if hasattr(ax, '_colorbar_info'):
            aspect = ax._colorbar_info['aspect']
        else:
            aspect = False
        # now shrink and/or offset to take into account the
        # extend tri/rectangles.
        if self._cbar.orientation == 'vertical':
            if aspect:
                self._cbar.ax.set_box_aspect(aspect*shrink)
            pos = pos.shrunk(1, shrink).translated(0, offset * pos.height)
        else:
            if aspect:
                self._cbar.ax.set_box_aspect(1/(aspect * shrink))
            pos = pos.shrunk(shrink, 1).translated(offset * pos.width, 0)
        return pos

    def get_subplotspec(self):
        # make tight_layout happy..
        ss = getattr(self._cbar.ax, 'get_subplotspec', None)
        if ss is None:
            if not hasattr(self._orig_locator, "get_subplotspec"):
                return None
            ss = self._orig_locator.get_subplotspec
        return ss()


@_docstring.Substitution(_colormap_kw_doc)
class Colorbar:
    r"""
    Draw a colorbar in an existing axes.

    Typically, colorbars are created using `.Figure.colorbar` or
    `.pyplot.colorbar` and associated with `.ScalarMappable`\s (such as an
    `.AxesImage` generated via `~.axes.Axes.imshow`).

    In order to draw a colorbar not associated with other elements in the
    figure, e.g. when showing a colormap by itself, one can create an empty
    `.ScalarMappable`, or directly pass *cmap* and *norm* instead of *mappable*
    to `Colorbar`.

    Useful public methods are :meth:`set_label` and :meth:`add_lines`.

    Attributes
    ----------
    ax : `~matplotlib.axes.Axes`
        The `~.axes.Axes` instance in which the colorbar is drawn.
    lines : list
        A list of `.LineCollection` (empty if no lines were drawn).
    dividers : `.LineCollection`
        A LineCollection (empty if *drawedges* is ``False``).

    Parameters
    ----------
    ax : `~matplotlib.axes.Axes`
        The `~.axes.Axes` instance in which the colorbar is drawn.

    mappable : `.ScalarMappable`
        The mappable whose colormap and norm will be used.

        To show the under- and over- value colors, the mappable's norm should
        be specified as ::

            norm = colors.Normalize(clip=False)

        To show the colors versus index instead of on a 0-1 scale, use::

            norm=colors.NoNorm()

    cmap : `~matplotlib.colors.Colormap`, default: :rc:`image.cmap`
        The colormap to use.  This parameter is ignored, unless *mappable* is
        None.

    norm : `~matplotlib.colors.Normalize`
        The normalization to use.  This parameter is ignored, unless *mappable*
        is None.

    alpha : float
        The colorbar transparency between 0 (transparent) and 1 (opaque).

    orientation : {'vertical', 'horizontal'}

    ticklocation : {'auto', 'left', 'right', 'top', 'bottom'}

    drawedges : bool

    filled : bool
    %s
    """

    n_rasterize = 50  # rasterize solids if number of colors >= n_rasterize

    @_api.delete_parameter("3.6", "filled")
    def __init__(self, ax, mappable=None, *, cmap=None,
                 norm=None,
                 alpha=None,
                 values=None,
                 boundaries=None,
                 orientation='vertical',
                 ticklocation='auto',
                 extend=None,
                 spacing='uniform',  # uniform or proportional
                 ticks=None,
                 format=None,
                 drawedges=False,
                 filled=True,
                 extendfrac=None,
                 extendrect=False,
                 label='',
                 ):

        if mappable is None:
            mappable = cm.ScalarMappable(norm=norm, cmap=cmap)

        # Ensure the given mappable's norm has appropriate vmin and vmax
        # set even if mappable.draw has not yet been called.
        if mappable.get_array() is not None:
            mappable.autoscale_None()

        self.mappable = mappable
        cmap = mappable.cmap
        norm = mappable.norm

        if isinstance(mappable, contour.ContourSet):
            cs = mappable
            alpha = cs.get_alpha()
            boundaries = cs._levels
            values = cs.cvalues
            extend = cs.extend
            filled = cs.filled
            if ticks is None:
                ticks = ticker.FixedLocator(cs.levels, nbins=10)
        elif isinstance(mappable, martist.Artist):
            alpha = mappable.get_alpha()

        mappable.colorbar = self
        mappable.colorbar_cid = mappable.callbacks.connect(
            'changed', self.update_normal)

        _api.check_in_list(
            ['vertical', 'horizontal'], orientation=orientation)
        _api.check_in_list(
            ['auto', 'left', 'right', 'top', 'bottom'],
            ticklocation=ticklocation)
        _api.check_in_list(
            ['uniform', 'proportional'], spacing=spacing)

        self.ax = ax
        self.ax._axes_locator = _ColorbarAxesLocator(self)

        if extend is None:
            if (not isinstance(mappable, contour.ContourSet)
                    and getattr(cmap, 'colorbar_extend', False) is not False):
                extend = cmap.colorbar_extend
            elif hasattr(norm, 'extend'):
                extend = norm.extend
            else:
                extend = 'neither'
        self.alpha = None
        # Call set_alpha to handle array-like alphas properly
        self.set_alpha(alpha)
        self.cmap = cmap
        self.norm = norm
        self.values = values
        self.boundaries = boundaries
        self.extend = extend
        self._inside = _api.check_getitem(
            {'neither': slice(0, None), 'both': slice(1, -1),
             'min': slice(1, None), 'max': slice(0, -1)},
            extend=extend)
        self.spacing = spacing
        self.orientation = orientation
        self.drawedges = drawedges
        self._filled = filled
        self.extendfrac = extendfrac
        self.extendrect = extendrect
        self._extend_patches = []
        self.solids = None
        self.solids_patches = []
        self.lines = []

        for spine in self.ax.spines.values():
            spine.set_visible(False)
        self.outline = self.ax.spines['outline'] = _ColorbarSpine(self.ax)
        self._short_axis().set_visible(False)
        # Only kept for backcompat; remove after deprecation of .patch elapses.
        self._patch = mpatches.Polygon(
            np.empty((0, 2)),
            color=mpl.rcParams['axes.facecolor'], linewidth=0.01, zorder=-1)
        ax.add_artist(self._patch)

        self.dividers = collections.LineCollection(
            [],
            colors=[mpl.rcParams['axes.edgecolor']],
            linewidths=[0.5 * mpl.rcParams['axes.linewidth']])
        self.ax.add_collection(self.dividers)

        self._locator = None
        self._minorlocator = None
        self._formatter = None
        self._minorformatter = None
        self.__scale = None  # linear, log10 for now.  Hopefully more?

        if ticklocation == 'auto':
            ticklocation = 'bottom' if orientation == 'horizontal' else 'right'
        self.ticklocation = ticklocation

        self.set_label(label)
        self._reset_locator_formatter_scale()

        if np.iterable(ticks):
            self._locator = ticker.FixedLocator(ticks, nbins=len(ticks))
        else:
            self._locator = ticks

        if isinstance(format, str):
            # Check format between FormatStrFormatter and StrMethodFormatter
            try:
                self._formatter = ticker.FormatStrFormatter(format)
                _ = self._formatter(0)
            except TypeError:
                self._formatter = ticker.StrMethodFormatter(format)
        else:
            self._formatter = format  # Assume it is a Formatter or None
        self._draw_all()

        if isinstance(mappable, contour.ContourSet) and not mappable.filled:
            self.add_lines(mappable)

        # Link the Axes and Colorbar for interactive use
        self.ax._colorbar = self
        # Don't navigate on any of these types of mappables
        if (isinstance(self.norm, (colors.BoundaryNorm, colors.NoNorm)) or
                isinstance(self.mappable, contour.ContourSet)):
            self.ax.set_navigate(False)

        # These are the functions that set up interactivity on this colorbar
        self._interactive_funcs = ["_get_view", "_set_view",
                                   "_set_view_from_bbox", "drag_pan"]
        for x in self._interactive_funcs:
            setattr(self.ax, x, getattr(self, x))
        # Set the cla function to the cbar's method to override it
        self.ax.cla = self._cbar_cla
        # Callbacks for the extend calculations to handle inverting the axis
        self._extend_cid1 = self.ax.callbacks.connect(
            "xlim_changed", self._do_extends)
        self._extend_cid2 = self.ax.callbacks.connect(
            "ylim_changed", self._do_extends)

    @property
    def locator(self):
        """Major tick `.Locator` for the colorbar."""
        return self._long_axis().get_major_locator()

    @locator.setter
    def locator(self, loc):
        self._long_axis().set_major_locator(loc)
        self._locator = loc

    @property
    def minorlocator(self):
        """Minor tick `.Locator` for the colorbar."""
        return self._long_axis().get_minor_locator()

    @minorlocator.setter
    def minorlocator(self, loc):
        self._long_axis().set_minor_locator(loc)
        self._minorlocator = loc

    @property
    def formatter(self):
        """Major tick label `.Formatter` for the colorbar."""
        return self._long_axis().get_major_formatter()

    @formatter.setter
    def formatter(self, fmt):
        self._long_axis().set_major_formatter(fmt)
        self._formatter = fmt

    @property
    def minorformatter(self):
        """Minor tick `.Formatter` for the colorbar."""
        return self._long_axis().get_minor_formatter()

    @minorformatter.setter
    def minorformatter(self, fmt):
        self._long_axis().set_minor_formatter(fmt)
        self._minorformatter = fmt

    def _cbar_cla(self):
        """Function to clear the interactive colorbar state."""
        for x in self._interactive_funcs:
            delattr(self.ax, x)
        # We now restore the old cla() back and can call it directly
        del self.ax.cla
        self.ax.cla()

    # Also remove ._patch after deprecation elapses.
    patch = _api.deprecate_privatize_attribute("3.5", alternative="ax")

    filled = _api.deprecate_privatize_attribute("3.6")

    def update_normal(self, mappable):
        """
        Update solid patches, lines, etc.

        This is meant to be called when the norm of the image or contour plot
        to which this colorbar belongs changes.

        If the norm on the mappable is different than before, this resets the
        locator and formatter for the axis, so if these have been customized,
        they will need to be customized again.  However, if the norm only
        changes values of *vmin*, *vmax* or *cmap* then the old formatter
        and locator will be preserved.
        """
        _log.debug('colorbar update normal %r %r', mappable.norm, self.norm)
        self.mappable = mappable
        self.set_alpha(mappable.get_alpha())
        self.cmap = mappable.cmap
        if mappable.norm != self.norm:
            self.norm = mappable.norm
            self._reset_locator_formatter_scale()

        self._draw_all()
        if isinstance(self.mappable, contour.ContourSet):
            CS = self.mappable
            if not CS.filled:
                self.add_lines(CS)
        self.stale = True

    @_api.deprecated("3.6", alternative="fig.draw_without_rendering()")
    def draw_all(self):
        """
        Calculate any free parameters based on the current cmap and norm,
        and do all the drawing.
        """
        self._draw_all()

    def _draw_all(self):
        """
        Calculate any free parameters based on the current cmap and norm,
        and do all the drawing.
        """
        if self.orientation == 'vertical':
            if mpl.rcParams['ytick.minor.visible']:
                self.minorticks_on()
        else:
            if mpl.rcParams['xtick.minor.visible']:
                self.minorticks_on()
        self._long_axis().set(label_position=self.ticklocation,
                              ticks_position=self.ticklocation)
        self._short_axis().set_ticks([])
        self._short_axis().set_ticks([], minor=True)

        # Set self._boundaries and self._values, including extensions.
        # self._boundaries are the edges of each square of color, and
        # self._values are the value to map into the norm to get the
        # color:
        self._process_values()
        # Set self.vmin and self.vmax to first and last boundary, excluding
        # extensions:
        self.vmin, self.vmax = self._boundaries[self._inside][[0, -1]]
        # Compute the X/Y mesh.
        X, Y = self._mesh()
        # draw the extend triangles, and shrink the inner axes to accommodate.
        # also adds the outline path to self.outline spine:
        self._do_extends()
        lower, upper = self.vmin, self.vmax
        if self._long_axis().get_inverted():
            # If the axis is inverted, we need to swap the vmin/vmax
            lower, upper = upper, lower
        if self.orientation == 'vertical':
            self.ax.set_xlim(0, 1)
            self.ax.set_ylim(lower, upper)
        else:
            self.ax.set_ylim(0, 1)
            self.ax.set_xlim(lower, upper)

        # set up the tick locators and formatters.  A bit complicated because
        # boundary norms + uniform spacing requires a manual locator.
        self.update_ticks()

        if self._filled:
            ind = np.arange(len(self._values))
            if self._extend_lower():
                ind = ind[1:]
            if self._extend_upper():
                ind = ind[:-1]
            self._add_solids(X, Y, self._values[ind, np.newaxis])

    def _add_solids(self, X, Y, C):
        """Draw the colors; optionally add separators."""
        # Cleanup previously set artists.
        if self.solids is not None:
            self.solids.remove()
        for solid in self.solids_patches:
            solid.remove()
        # Add new artist(s), based on mappable type.  Use individual patches if
        # hatching is needed, pcolormesh otherwise.
        mappable = getattr(self, 'mappable', None)
        if (isinstance(mappable, contour.ContourSet)
                and any(hatch is not None for hatch in mappable.hatches)):
            self._add_solids_patches(X, Y, C, mappable)
        else:
            self.solids = self.ax.pcolormesh(
                X, Y, C, cmap=self.cmap, norm=self.norm, alpha=self.alpha,
                edgecolors='none', shading='flat')
            if not self.drawedges:
                if len(self._y) >= self.n_rasterize:
                    self.solids.set_rasterized(True)
        if self.drawedges:
            start_idx = 0 if self._extend_lower() else 1
            end_idx = len(X) if self._extend_upper() else -1
            self.dividers.set_segments(np.dstack([X, Y])[start_idx:end_idx])
        else:
            self.dividers.set_segments([])

    def _add_solids_patches(self, X, Y, C, mappable):
        hatches = mappable.hatches * len(C)  # Have enough hatches.
        patches = []
        for i in range(len(X) - 1):
            xy = np.array([[X[i, 0], Y[i, 0]],
                           [X[i, 1], Y[i, 0]],
                           [X[i + 1, 1], Y[i + 1, 0]],
                           [X[i + 1, 0], Y[i + 1, 1]]])
            patch = mpatches.PathPatch(mpath.Path(xy),
                                       facecolor=self.cmap(self.norm(C[i][0])),
                                       hatch=hatches[i], linewidth=0,
                                       antialiased=False, alpha=self.alpha)
            self.ax.add_patch(patch)
            patches.append(patch)
        self.solids_patches = patches

    def _do_extends(self, ax=None):
        """
        Add the extend tri/rectangles on the outside of the axes.

        ax is unused, but required due to the callbacks on xlim/ylim changed
        """
        # Clean up any previous extend patches
        for patch in self._extend_patches:
            patch.remove()
        self._extend_patches = []
        # extend lengths are fraction of the *inner* part of colorbar,
        # not the total colorbar:
        _, extendlen = self._proportional_y()
        bot = 0 - (extendlen[0] if self._extend_lower() else 0)
        top = 1 + (extendlen[1] if self._extend_upper() else 0)

        # xyout is the outline of the colorbar including the extend patches:
        if not self.extendrect:
            # triangle:
            xyout = np.array([[0, 0], [0.5, bot], [1, 0],
                              [1, 1], [0.5, top], [0, 1], [0, 0]])
        else:
            # rectangle:
            xyout = np.array([[0, 0], [0, bot], [1, bot], [1, 0],
                              [1, 1], [1, top], [0, top], [0, 1],
                              [0, 0]])

        if self.orientation == 'horizontal':
            xyout = xyout[:, ::-1]

        # xyout is the path for the spine:
        self.outline.set_xy(xyout)
        if not self._filled:
            return

        # Make extend triangles or rectangles filled patches.  These are
        # defined in the outer parent axes' coordinates:
        mappable = getattr(self, 'mappable', None)
        if (isinstance(mappable, contour.ContourSet)
                and any(hatch is not None for hatch in mappable.hatches)):
            hatches = mappable.hatches
        else:
            hatches = [None]

        if self._extend_lower():
            if not self.extendrect:
                # triangle
                xy = np.array([[0, 0], [0.5, bot], [1, 0]])
            else:
                # rectangle
                xy = np.array([[0, 0], [0, bot], [1., bot], [1, 0]])
            if self.orientation == 'horizontal':
                xy = xy[:, ::-1]
            # add the patch
            val = -1 if self._long_axis().get_inverted() else 0
            color = self.cmap(self.norm(self._values[val]))
            patch = mpatches.PathPatch(
                mpath.Path(xy), facecolor=color, alpha=self.alpha,
                linewidth=0, antialiased=False,
                transform=self.ax.transAxes,
                hatch=hatches[0], clip_on=False,
                # Place it right behind the standard patches, which is
                # needed if we updated the extends
                zorder=np.nextafter(self.ax.patch.zorder, -np.inf))
            self.ax.add_patch(patch)
            self._extend_patches.append(patch)
        if self._extend_upper():
            if not self.extendrect:
                # triangle
                xy = np.array([[0, 1], [0.5, top], [1, 1]])
            else:
                # rectangle
                xy = np.array([[0, 1], [0, top], [1, top], [1, 1]])
            if self.orientation == 'horizontal':
                xy = xy[:, ::-1]
            # add the patch
            val = 0 if self._long_axis().get_inverted() else -1
            color = self.cmap(self.norm(self._values[val]))
            patch = mpatches.PathPatch(
                mpath.Path(xy), facecolor=color, alpha=self.alpha,
                linewidth=0, antialiased=False,
                transform=self.ax.transAxes, hatch=hatches[-1], clip_on=False,
                # Place it right behind the standard patches, which is
                # needed if we updated the extends
                zorder=np.nextafter(self.ax.patch.zorder, -np.inf))
            self.ax.add_patch(patch)
            self._extend_patches.append(patch)
        return

    def add_lines(self, *args, **kwargs):
        """
        Draw lines on the colorbar.

        The lines are appended to the list :attr:`lines`.

        Parameters
        ----------
        levels : array-like
            The positions of the lines.
        colors : color or list of colors
            Either a single color applying to all lines or one color value for
            each line.
        linewidths : float or array-like
            Either a single linewidth applying to all lines or one linewidth
            for each line.
        erase : bool, default: True
            Whether to remove any previously added lines.

        Notes
        -----
        Alternatively, this method can also be called with the signature
        ``colorbar.add_lines(contour_set, erase=True)``, in which case
        *levels*, *colors*, and *linewidths* are taken from *contour_set*.
        """
        params = _api.select_matching_signature(
            [lambda self, CS, erase=True: locals(),
             lambda self, levels, colors, linewidths, erase=True: locals()],
            self, *args, **kwargs)
        if "CS" in params:
            self, CS, erase = params.values()
            if not isinstance(CS, contour.ContourSet) or CS.filled:
                raise ValueError("If a single artist is passed to add_lines, "
                                 "it must be a ContourSet of lines")
            # TODO: Make colorbar lines auto-follow changes in contour lines.
            return self.add_lines(
                CS.levels,
                [c[0] for c in CS.tcolors],
                [t[0] for t in CS.tlinewidths],
                erase=erase)
        else:
            self, levels, colors, linewidths, erase = params.values()

        y = self._locate(levels)
        rtol = (self._y[-1] - self._y[0]) * 1e-10
        igood = (y < self._y[-1] + rtol) & (y > self._y[0] - rtol)
        y = y[igood]
        if np.iterable(colors):
            colors = np.asarray(colors)[igood]
        if np.iterable(linewidths):
            linewidths = np.asarray(linewidths)[igood]
        X, Y = np.meshgrid([0, 1], y)
        if self.orientation == 'vertical':
            xy = np.stack([X, Y], axis=-1)
        else:
            xy = np.stack([Y, X], axis=-1)
        col = collections.LineCollection(xy, linewidths=linewidths,
                                         colors=colors)

        if erase and self.lines:
            for lc in self.lines:
                lc.remove()
            self.lines = []
        self.lines.append(col)

        # make a clip path that is just a linewidth bigger than the axes...
        fac = np.max(linewidths) / 72
        xy = np.array([[0, 0], [1, 0], [1, 1], [0, 1], [0, 0]])
        inches = self.ax.get_figure().dpi_scale_trans
        # do in inches:
        xy = inches.inverted().transform(self.ax.transAxes.transform(xy))
        xy[[0, 1, 4], 1] -= fac
        xy[[2, 3], 1] += fac
        # back to axes units...
        xy = self.ax.transAxes.inverted().transform(inches.transform(xy))
        col.set_clip_path(mpath.Path(xy, closed=True),
                          self.ax.transAxes)
        self.ax.add_collection(col)
        self.stale = True

    def update_ticks(self):
        """
        Setup the ticks and ticklabels. This should not be needed by users.
        """
        # Get the locator and formatter; defaults to self._locator if not None.
        self._get_ticker_locator_formatter()
        self._long_axis().set_major_locator(self._locator)
        self._long_axis().set_minor_locator(self._minorlocator)
        self._long_axis().set_major_formatter(self._formatter)

    def _get_ticker_locator_formatter(self):
        """
        Return the ``locator`` and ``formatter`` of the colorbar.

        If they have not been defined (i.e. are *None*), the formatter and
        locator are retrieved from the axis, or from the value of the
        boundaries for a boundary norm.

        Called by update_ticks...
        """
        locator = self._locator
        formatter = self._formatter
        minorlocator = self._minorlocator
        if isinstance(self.norm, colors.BoundaryNorm):
            b = self.norm.boundaries
            if locator is None:
                locator = ticker.FixedLocator(b, nbins=10)
            if minorlocator is None:
                minorlocator = ticker.FixedLocator(b)
        elif isinstance(self.norm, colors.NoNorm):
            if locator is None:
                # put ticks on integers between the boundaries of NoNorm
                nv = len(self._values)
                base = 1 + int(nv / 10)
                locator = ticker.IndexLocator(base=base, offset=.5)
        elif self.boundaries is not None:
            b = self._boundaries[self._inside]
            if locator is None:
                locator = ticker.FixedLocator(b, nbins=10)
        else:  # most cases:
            if locator is None:
                # we haven't set the locator explicitly, so use the default
                # for this axis:
                locator = self._long_axis().get_major_locator()
            if minorlocator is None:
                minorlocator = self._long_axis().get_minor_locator()

        if minorlocator is None:
            minorlocator = ticker.NullLocator()

        if formatter is None:
            formatter = self._long_axis().get_major_formatter()

        self._locator = locator
        self._formatter = formatter
        self._minorlocator = minorlocator
        _log.debug('locator: %r', locator)

    @_api.delete_parameter("3.5", "update_ticks")
    def set_ticks(self, ticks, update_ticks=True, labels=None, *,
                  minor=False, **kwargs):
        """
        Set tick locations.

        Parameters
        ----------
        ticks : list of floats
            List of tick locations.
        labels : list of str, optional
            List of tick labels. If not set, the labels show the data value.
        minor : bool, default: False
            If ``False``, set the major ticks; if ``True``, the minor ticks.
        **kwargs
            `.Text` properties for the labels. These take effect only if you
            pass *labels*. In other cases, please use `~.Axes.tick_params`.
        """
        if np.iterable(ticks):
            self._long_axis().set_ticks(ticks, labels=labels, minor=minor,
                                        **kwargs)
            self._locator = self._long_axis().get_major_locator()
        else:
            self._locator = ticks
            self._long_axis().set_major_locator(self._locator)
        self.stale = True

    def get_ticks(self, minor=False):
        """
        Return the ticks as a list of locations.

        Parameters
        ----------
        minor : boolean, default: False
            if True return the minor ticks.
        """
        if minor:
            return self._long_axis().get_minorticklocs()
        else:
            return self._long_axis().get_majorticklocs()

    @_api.delete_parameter("3.5", "update_ticks")
    def set_ticklabels(self, ticklabels, update_ticks=True, *, minor=False,
                       **kwargs):
        """
        Set tick labels.

        .. admonition:: Discouraged

            The use of this method is discouraged, because of the dependency
            on tick positions. In most cases, you'll want to use
            ``set_ticks(positions, labels=labels)`` instead.

            If you are using this method, you should always fix the tick
            positions before, e.g. by using `.Colorbar.set_ticks` or by
            explicitly setting a `~.ticker.FixedLocator` on the long axis
            of the colorbar. Otherwise, ticks are free to move and the
            labels may end up in unexpected positions.

        Parameters
        ----------
        ticklabels : sequence of str or of `.Text`
            Texts for labeling each tick location in the sequence set by
            `.Colorbar.set_ticks`; the number of labels must match the number
            of locations.

        update_ticks : bool, default: True
            This keyword argument is ignored and will be be removed.
            Deprecated

         minor : bool
            If True, set minor ticks instead of major ticks.

        **kwargs
            `.Text` properties for the labels.
        """
        self._long_axis().set_ticklabels(ticklabels, minor=minor, **kwargs)

    def minorticks_on(self):
        """
        Turn on colorbar minor ticks.
        """
        self.ax.minorticks_on()
        self._short_axis().set_minor_locator(ticker.NullLocator())

    def minorticks_off(self):
        """Turn the minor ticks of the colorbar off."""
        self._minorlocator = ticker.NullLocator()
        self._long_axis().set_minor_locator(self._minorlocator)

    def set_label(self, label, *, loc=None, **kwargs):
        """
        Add a label to the long axis of the colorbar.

        Parameters
        ----------
        label : str
            The label text.
        loc : str, optional
            The location of the label.

            - For horizontal orientation one of {'left', 'center', 'right'}
            - For vertical orientation one of {'bottom', 'center', 'top'}

            Defaults to :rc:`xaxis.labellocation` or :rc:`yaxis.labellocation`
            depending on the orientation.
        **kwargs
            Keyword arguments are passed to `~.Axes.set_xlabel` /
            `~.Axes.set_ylabel`.
            Supported keywords are *labelpad* and `.Text` properties.
        """
        if self.orientation == "vertical":
            self.ax.set_ylabel(label, loc=loc, **kwargs)
        else:
            self.ax.set_xlabel(label, loc=loc, **kwargs)
        self.stale = True

    def set_alpha(self, alpha):
        """
        Set the transparency between 0 (transparent) and 1 (opaque).

        If an array is provided, *alpha* will be set to None to use the
        transparency values associated with the colormap.
        """
        self.alpha = None if isinstance(alpha, np.ndarray) else alpha

    def _set_scale(self, scale, **kwargs):
        """
        Set the colorbar long axis scale.

        Parameters
        ----------
        value : {"linear", "log", "symlog", "logit", ...} or `.ScaleBase`
            The axis scale type to apply.

        **kwargs
            Different keyword arguments are accepted, depending on the scale.
            See the respective class keyword arguments:

            - `matplotlib.scale.LinearScale`
            - `matplotlib.scale.LogScale`
            - `matplotlib.scale.SymmetricalLogScale`
            - `matplotlib.scale.LogitScale`
            - `matplotlib.scale.FuncScale`

        Notes
        -----
        By default, Matplotlib supports the above mentioned scales.
        Additionally, custom scales may be registered using
        `matplotlib.scale.register_scale`. These scales can then also
        be used here.
        """
        if self.orientation == 'vertical':
            self.ax.set_yscale(scale, **kwargs)
        else:
            self.ax.set_xscale(scale, **kwargs)
        if isinstance(scale, mscale.ScaleBase):
            self.__scale = scale.name
        else:
            self.__scale = scale

    def remove(self):
        """
        Remove this colorbar from the figure.

        If the colorbar was created with ``use_gridspec=True`` the previous
        gridspec is restored.
        """
        if hasattr(self.ax, '_colorbar_info'):
            parents = self.ax._colorbar_info['parents']
            for a in parents:
                if self.ax in a._colorbars:
                    a._colorbars.remove(self.ax)

        self.ax.remove()

        self.mappable.callbacks.disconnect(self.mappable.colorbar_cid)
        self.mappable.colorbar = None
        self.mappable.colorbar_cid = None
        # Remove the extension callbacks
        self.ax.callbacks.disconnect(self._extend_cid1)
        self.ax.callbacks.disconnect(self._extend_cid2)

        try:
            ax = self.mappable.axes
        except AttributeError:
            return
        try:
            gs = ax.get_subplotspec().get_gridspec()
            subplotspec = gs.get_topmost_subplotspec()
        except AttributeError:
            # use_gridspec was False
            pos = ax.get_position(original=True)
            ax._set_position(pos)
        else:
            # use_gridspec was True
            ax.set_subplotspec(subplotspec)

    def _process_values(self):
        """
        Set `_boundaries` and `_values` based on the self.boundaries and
        self.values if not None, or based on the size of the colormap and
        the vmin/vmax of the norm.
        """
        if self.values is not None:
            # set self._boundaries from the values...
            self._values = np.array(self.values)
            if self.boundaries is None:
                # bracket values by 1/2 dv:
                b = np.zeros(len(self.values) + 1)
                b[1:-1] = 0.5 * (self._values[:-1] + self._values[1:])
                b[0] = 2.0 * b[1] - b[2]
                b[-1] = 2.0 * b[-2] - b[-3]
                self._boundaries = b
                return
            self._boundaries = np.array(self.boundaries)
            return

        # otherwise values are set from the boundaries
        if isinstance(self.norm, colors.BoundaryNorm):
            b = self.norm.boundaries
        elif isinstance(self.norm, colors.NoNorm):
            # NoNorm has N blocks, so N+1 boundaries, centered on integers:
            b = np.arange(self.cmap.N + 1) - .5
        elif self.boundaries is not None:
            b = self.boundaries
        else:
            # otherwise make the boundaries from the size of the cmap:
            N = self.cmap.N + 1
            b, _ = self._uniform_y(N)
        # add extra boundaries if needed:
        if self._extend_lower():
            b = np.hstack((b[0] - 1, b))
        if self._extend_upper():
            b = np.hstack((b, b[-1] + 1))

        # transform from 0-1 to vmin-vmax:
        if not self.norm.scaled():
            self.norm.vmin = 0
            self.norm.vmax = 1
        self.norm.vmin, self.norm.vmax = mtransforms.nonsingular(
            self.norm.vmin, self.norm.vmax, expander=0.1)
        if (not isinstance(self.norm, colors.BoundaryNorm) and
                (self.boundaries is None)):
            b = self.norm.inverse(b)

        self._boundaries = np.asarray(b, dtype=float)
        self._values = 0.5 * (self._boundaries[:-1] + self._boundaries[1:])
        if isinstance(self.norm, colors.NoNorm):
            self._values = (self._values + 0.00001).astype(np.int16)

    def _mesh(self):
        """
        Return the coordinate arrays for the colorbar pcolormesh/patches.

        These are scaled between vmin and vmax, and already handle colorbar
        orientation.
        """
        y, _ = self._proportional_y()
        # Use the vmin and vmax of the colorbar, which may not be the same
        # as the norm. There are situations where the colormap has a
        # narrower range than the colorbar and we want to accommodate the
        # extra contours.
        if (isinstance(self.norm, (colors.BoundaryNorm, colors.NoNorm))
                or self.boundaries is not None):
            # not using a norm.
            y = y * (self.vmax - self.vmin) + self.vmin
        else:
            # Update the norm values in a context manager as it is only
            # a temporary change and we don't want to propagate any signals
            # attached to the norm (callbacks.blocked).
            with self.norm.callbacks.blocked(), \
                    cbook._setattr_cm(self.norm,
                                      vmin=self.vmin,
                                      vmax=self.vmax):
                y = self.norm.inverse(y)
        self._y = y
        X, Y = np.meshgrid([0., 1.], y)
        if self.orientation == 'vertical':
            return (X, Y)
        else:
            return (Y, X)

    def _forward_boundaries(self, x):
        # map boundaries equally between 0 and 1...
        b = self._boundaries
        y = np.interp(x, b, np.linspace(0, 1, len(b)))
        # the following avoids ticks in the extends:
        eps = (b[-1] - b[0]) * 1e-6
        # map these _well_ out of bounds to keep any ticks out
        # of the extends region...
        y[x < b[0]-eps] = -1
        y[x > b[-1]+eps] = 2
        return y

    def _inverse_boundaries(self, x):
        # invert the above...
        b = self._boundaries
        return np.interp(x, np.linspace(0, 1, len(b)), b)

    def _reset_locator_formatter_scale(self):
        """
        Reset the locator et al to defaults.  Any user-hardcoded changes
        need to be re-entered if this gets called (either at init, or when
        the mappable normal gets changed: Colorbar.update_normal)
        """
        self._process_values()
        self._locator = None
        self._minorlocator = None
        self._formatter = None
        self._minorformatter = None
        if (self.boundaries is not None or
                isinstance(self.norm, colors.BoundaryNorm)):
            if self.spacing == 'uniform':
                funcs = (self._forward_boundaries, self._inverse_boundaries)
                self._set_scale('function', functions=funcs)
            elif self.spacing == 'proportional':
                if isinstance(self.norm, colors.LogNorm):
                    self._set_scale('linear')
                else:
                    self._set_scale('log')
        elif getattr(self.norm, '_scale', None):
            # use the norm's scale (if it exists and is not None):
            self._set_scale(self.norm._scale)
        elif type(self.norm) is colors.Normalize:
            # plain Normalize:
            self._set_scale('linear')
        else:
            # norm._scale is None or not an attr: derive the scale from
            # the Norm:
            funcs = (self.norm, self.norm.inverse)
            self._set_scale('function', functions=funcs)

    def _locate(self, x):
        """
        Given a set of color data values, return their
        corresponding colorbar data coordinates.
        """
        if isinstance(self.norm, (colors.NoNorm, colors.BoundaryNorm)):
            b = self._boundaries
            xn = x
        else:
            # Do calculations using normalized coordinates so
            # as to make the interpolation more accurate.
            b = self.norm(self._boundaries, clip=False).filled()
            xn = self.norm(x, clip=False).filled()

        bunique = b[self._inside]
        yunique = self._y

        z = np.interp(xn, bunique, yunique)
        return z

    # trivial helpers

    def _uniform_y(self, N):
        """
        Return colorbar data coordinates for *N* uniformly
        spaced boundaries, plus extension lengths if required.
        """
        automin = automax = 1. / (N - 1.)
        extendlength = self._get_extension_lengths(self.extendfrac,
                                                   automin, automax,
                                                   default=0.05)
        y = np.linspace(0, 1, N)
        return y, extendlength

    def _proportional_y(self):
        """
        Return colorbar data coordinates for the boundaries of
        a proportional colorbar, plus extension lengths if required:
        """
        if (isinstance(self.norm, colors.BoundaryNorm) or
                self.boundaries is not None):
            y = (self._boundaries - self._boundaries[self._inside][0])
            y = y / (self._boundaries[self._inside][-1] -
                     self._boundaries[self._inside][0])
            # need yscaled the same as the axes scale to get
            # the extend lengths.
            if self.spacing == 'uniform':
                yscaled = self._forward_boundaries(self._boundaries)
            else:
                yscaled = y
        else:
            y = self.norm(self._boundaries.copy())
            y = np.ma.filled(y, np.nan)
            # the norm and the scale should be the same...
            yscaled = y
        y = y[self._inside]
        yscaled = yscaled[self._inside]
        # normalize from 0..1:
        norm = colors.Normalize(y[0], y[-1])
        y = np.ma.filled(norm(y), np.nan)
        norm = colors.Normalize(yscaled[0], yscaled[-1])
        yscaled = np.ma.filled(norm(yscaled), np.nan)
        # make the lower and upper extend lengths proportional to the lengths
        # of the first and last boundary spacing (if extendfrac='auto'):
        automin = yscaled[1] - yscaled[0]
        automax = yscaled[-1] - yscaled[-2]
        extendlength = [0, 0]
        if self._extend_lower() or self._extend_upper():
            extendlength = self._get_extension_lengths(
                    self.extendfrac, automin, automax, default=0.05)
        return y, extendlength

    def _get_extension_lengths(self, frac, automin, automax, default=0.05):
        """
        Return the lengths of colorbar extensions.

        This is a helper method for _uniform_y and _proportional_y.
        """
        # Set the default value.
        extendlength = np.array([default, default])
        if isinstance(frac, str):
            _api.check_in_list(['auto'], extendfrac=frac.lower())
            # Use the provided values when 'auto' is required.
            extendlength[:] = [automin, automax]
        elif frac is not None:
            try:
                # Try to set min and max extension fractions directly.
                extendlength[:] = frac
                # If frac is a sequence containing None then NaN may
                # be encountered. This is an error.
                if np.isnan(extendlength).any():
                    raise ValueError()
            except (TypeError, ValueError) as err:
                # Raise an error on encountering an invalid value for frac.
                raise ValueError('invalid value for extendfrac') from err
        return extendlength

    def _extend_lower(self):
        """Return whether the lower limit is open ended."""
        minmax = "max" if self._long_axis().get_inverted() else "min"
        return self.extend in ('both', minmax)

    def _extend_upper(self):
        """Return whether the upper limit is open ended."""
        minmax = "min" if self._long_axis().get_inverted() else "max"
        return self.extend in ('both', minmax)

    def _long_axis(self):
        """Return the long axis"""
        if self.orientation == 'vertical':
            return self.ax.yaxis
        return self.ax.xaxis

    def _short_axis(self):
        """Return the short axis"""
        if self.orientation == 'vertical':
            return self.ax.xaxis
        return self.ax.yaxis

    def _get_view(self):
        # docstring inherited
        # An interactive view for a colorbar is the norm's vmin/vmax
        return self.norm.vmin, self.norm.vmax

    def _set_view(self, view):
        # docstring inherited
        # An interactive view for a colorbar is the norm's vmin/vmax
        self.norm.vmin, self.norm.vmax = view

    def _set_view_from_bbox(self, bbox, direction='in',
                            mode=None, twinx=False, twiny=False):
        # docstring inherited
        # For colorbars, we use the zoom bbox to scale the norm's vmin/vmax
        new_xbound, new_ybound = self.ax._prepare_view_from_bbox(
            bbox, direction=direction, mode=mode, twinx=twinx, twiny=twiny)
        if self.orientation == 'horizontal':
            self.norm.vmin, self.norm.vmax = new_xbound
        elif self.orientation == 'vertical':
            self.norm.vmin, self.norm.vmax = new_ybound

    def drag_pan(self, button, key, x, y):
        # docstring inherited
        points = self.ax._get_pan_points(button, key, x, y)
        if points is not None:
            if self.orientation == 'horizontal':
                self.norm.vmin, self.norm.vmax = points[:, 0]
            elif self.orientation == 'vertical':
                self.norm.vmin, self.norm.vmax = points[:, 1]


ColorbarBase = Colorbar  # Backcompat API


def _normalize_location_orientation(location, orientation):
    if location is None:
        location = _api.check_getitem(
            {None: "right", "vertical": "right", "horizontal": "bottom"},
            orientation=orientation)
    loc_settings = _api.check_getitem({
        "left":   {"location": "left", "orientation": "vertical",
                   "anchor": (1.0, 0.5), "panchor": (0.0, 0.5), "pad": 0.10},
        "right":  {"location": "right", "orientation": "vertical",
                   "anchor": (0.0, 0.5), "panchor": (1.0, 0.5), "pad": 0.05},
        "top":    {"location": "top", "orientation": "horizontal",
                   "anchor": (0.5, 0.0), "panchor": (0.5, 1.0), "pad": 0.05},
        "bottom": {"location": "bottom", "orientation": "horizontal",
                   "anchor": (0.5, 1.0), "panchor": (0.5, 0.0), "pad": 0.15},
    }, location=location)
    if orientation is not None and orientation != loc_settings["orientation"]:
        # Allow the user to pass both if they are consistent.
        raise TypeError("location and orientation are mutually exclusive")
    return loc_settings


@_docstring.Substitution(_make_axes_kw_doc)
def make_axes(parents, location=None, orientation=None, fraction=0.15,
              shrink=1.0, aspect=20, **kwargs):
    """
    Create an `~.axes.Axes` suitable for a colorbar.

    The axes is placed in the figure of the *parents* axes, by resizing and
    repositioning *parents*.

    Parameters
    ----------
    parents : `~.axes.Axes` or list of `~.axes.Axes`
        The Axes to use as parents for placing the colorbar.
    %s

    Returns
    -------
    cax : `~.axes.Axes`
        The child axes.
    kwargs : dict
        The reduced keyword dictionary to be passed when creating the colorbar
        instance.
    """
    loc_settings = _normalize_location_orientation(location, orientation)
    # put appropriate values into the kwargs dict for passing back to
    # the Colorbar class
    kwargs['orientation'] = loc_settings['orientation']
    location = kwargs['ticklocation'] = loc_settings['location']

    anchor = kwargs.pop('anchor', loc_settings['anchor'])
    panchor = kwargs.pop('panchor', loc_settings['panchor'])
    aspect0 = aspect
    # turn parents into a list if it is not already.  Note we cannot
    # use .flatten or .ravel as these copy the references rather than
    # reuse them, leading to a memory leak
    if isinstance(parents, np.ndarray):
        parents = list(parents.flat)
    elif not isinstance(parents, list):
        parents = [parents]
    fig = parents[0].get_figure()

    pad0 = 0.05 if fig.get_constrained_layout() else loc_settings['pad']
    pad = kwargs.pop('pad', pad0)

    if not all(fig is ax.get_figure() for ax in parents):
        raise ValueError('Unable to create a colorbar axes as not all '
                         'parents share the same figure.')

    # take a bounding box around all of the given axes
    parents_bbox = mtransforms.Bbox.union(
        [ax.get_position(original=True).frozen() for ax in parents])

    pb = parents_bbox
    if location in ('left', 'right'):
        if location == 'left':
            pbcb, _, pb1 = pb.splitx(fraction, fraction + pad)
        else:
            pb1, _, pbcb = pb.splitx(1 - fraction - pad, 1 - fraction)
        pbcb = pbcb.shrunk(1.0, shrink).anchored(anchor, pbcb)
    else:
        if location == 'bottom':
            pbcb, _, pb1 = pb.splity(fraction, fraction + pad)
        else:
            pb1, _, pbcb = pb.splity(1 - fraction - pad, 1 - fraction)
        pbcb = pbcb.shrunk(shrink, 1.0).anchored(anchor, pbcb)

        # define the aspect ratio in terms of y's per x rather than x's per y
        aspect = 1.0 / aspect

    # define a transform which takes us from old axes coordinates to
    # new axes coordinates
    shrinking_trans = mtransforms.BboxTransform(parents_bbox, pb1)

    # transform each of the axes in parents using the new transform
    for ax in parents:
        new_posn = shrinking_trans.transform(ax.get_position(original=True))
        new_posn = mtransforms.Bbox(new_posn)
        ax._set_position(new_posn)
        if panchor is not False:
            ax.set_anchor(panchor)

    cax = fig.add_axes(pbcb, label="<colorbar>")
    for a in parents:
        # tell the parent it has a colorbar
        a._colorbars += [cax]
    cax._colorbar_info = dict(
        parents=parents,
        location=location,
        shrink=shrink,
        anchor=anchor,
        panchor=panchor,
        fraction=fraction,
        aspect=aspect0,
        pad=pad)
    # and we need to set the aspect ratio by hand...
    cax.set_anchor(anchor)
    cax.set_box_aspect(aspect)
    cax.set_aspect('auto')

    return cax, kwargs


@_docstring.Substitution(_make_axes_kw_doc)
def make_axes_gridspec(parent, *, location=None, orientation=None,
                       fraction=0.15, shrink=1.0, aspect=20, **kwargs):
    """
    Create a `.SubplotBase` suitable for a colorbar.

    The axes is placed in the figure of the *parent* axes, by resizing and
    repositioning *parent*.

    This function is similar to `.make_axes`. Primary differences are

    - `.make_axes_gridspec` should only be used with a `.SubplotBase` parent.

    - `.make_axes` creates an `~.axes.Axes`; `.make_axes_gridspec` creates a
      `.SubplotBase`.

    - `.make_axes` updates the position of the parent.  `.make_axes_gridspec`
      replaces the ``grid_spec`` attribute of the parent with a new one.

    While this function is meant to be compatible with `.make_axes`,
    there could be some minor differences.

    Parameters
    ----------
    parent : `~.axes.Axes`
        The Axes to use as parent for placing the colorbar.
    %s

    Returns
    -------
    cax : `~.axes.SubplotBase`
        The child axes.
    kwargs : dict
        The reduced keyword dictionary to be passed when creating the colorbar
        instance.
    """

    loc_settings = _normalize_location_orientation(location, orientation)
    kwargs['orientation'] = loc_settings['orientation']
    location = kwargs['ticklocation'] = loc_settings['location']

    aspect0 = aspect
    anchor = kwargs.pop('anchor', loc_settings['anchor'])
    panchor = kwargs.pop('panchor', loc_settings['panchor'])
    pad = kwargs.pop('pad', loc_settings["pad"])
    wh_space = 2 * pad / (1 - pad)

    if location in ('left', 'right'):
        # for shrinking
        height_ratios = [
                (1-anchor[1])*(1-shrink), shrink, anchor[1]*(1-shrink)]

        if location == 'left':
            gs = parent.get_subplotspec().subgridspec(
                    1, 2, wspace=wh_space,
                    width_ratios=[fraction, 1-fraction-pad])
            ss_main = gs[1]
            ss_cb = gs[0].subgridspec(
                    3, 1, hspace=0, height_ratios=height_ratios)[1]
        else:
            gs = parent.get_subplotspec().subgridspec(
                    1, 2, wspace=wh_space,
                    width_ratios=[1-fraction-pad, fraction])
            ss_main = gs[0]
            ss_cb = gs[1].subgridspec(
                    3, 1, hspace=0, height_ratios=height_ratios)[1]
    else:
        # for shrinking
        width_ratios = [
                anchor[0]*(1-shrink), shrink, (1-anchor[0])*(1-shrink)]

        if location == 'bottom':
            gs = parent.get_subplotspec().subgridspec(
                    2, 1, hspace=wh_space,
                    height_ratios=[1-fraction-pad, fraction])
            ss_main = gs[0]
            ss_cb = gs[1].subgridspec(
                    1, 3, wspace=0, width_ratios=width_ratios)[1]
            aspect = 1 / aspect
        else:
            gs = parent.get_subplotspec().subgridspec(
                    2, 1, hspace=wh_space,
                    height_ratios=[fraction, 1-fraction-pad])
            ss_main = gs[1]
            ss_cb = gs[0].subgridspec(
                    1, 3, wspace=0, width_ratios=width_ratios)[1]
            aspect = 1 / aspect

    parent.set_subplotspec(ss_main)
    if panchor is not False:
        parent.set_anchor(panchor)

    fig = parent.get_figure()
    cax = fig.add_subplot(ss_cb, label="<colorbar>")
    cax.set_anchor(anchor)
    cax.set_box_aspect(aspect)
    cax.set_aspect('auto')
    cax._colorbar_info = dict(
        location=location,
        parents=[parent],
        shrink=shrink,
        anchor=anchor,
        panchor=panchor,
        fraction=fraction,
        aspect=aspect0,
        pad=pad)

    return cax, kwargs