change add-to-group/secure-join QR code data from OPENPGP4FPR:- to i.delta.chat-scheme

[r10s]

using https://i.delta.chat... links in the QR codes allows users to scan the QR code with any mobile without having delta chat installed yet.

users will then get instructions how to install delta chat, resulting in a much better ux workflow as sharing such a link works in more cases.

to be clear: scanning from Delta Chat still does not do any calls to i.delta.chat or to somewhere else - i.delta.chat can even be down or being blocked.

drawback would only be that openkeychain won't be able to scan these codes, however, not sure if someone ever did that (the other way round, will still work - and openkeychain can be fixed as well)

question is about timing:

starting with 1.44 releases (using core 1.134.0 and merged #5219), i.delta.chat links in QR codes are accepted equivalent to OPENPGP4FPR: (in fact, they differ only by first &/#)

so, if we change the QR codes in the upcoming 1.46, an 1.42 does not support these QR codes directly - but maybe that's okay as Delta Chat offers to open the URL in the browser - and from there, one should be able to do the join. so, maybe the benefits of getting new users are more important than to support ppl that did not upgrade :)
but the new flow should definetely be tested with a 1.42

---

EDIT: what should also be tested before targeting this issue, is what happens when "common" system cameras scan the i.delta.chat code when delta chat is installed. if delta chat is opened for OPENPGP4FPR: directly, it would be cool if that happens also for i.delta.chat.

here is are two test QR codes that should ideally behave the same when scanning with the system camera (no need to check from inside delta chat)

   

(just check if the message "Chat with Bob...?" is asked, no need to really do the join, Bob is probably offline anyways :)

the qr codes contain the data https://i.delta.chat/#4BBB21F24BF172148246CFAA5FB0363572FC9FE1&a=siznq0vgz%40nine.testrun.org&n=bob&i=Sh3Dwasz8K5&s=UjY23SgefLvresp. OPENPGP4FPR:4BBB21F24BF172148246CFAA5FB0363572FC9FE1#a=siznq0vgz%40nine.testrun.org&n=bob&i=Sh3Dwasz8K5&s=UjY23SgefLv

• ✅ iOS 17 system camera opens Delta Chat for both codes
• ✅ iOS 15 system camera opens Delta Chat for both codes
• ✅ LG CAM system camera opens none of the codes on android7 (failing for both is no worsening, so: check)
• ✅ F-Droid's "Barcode Scanner" allows to open Delta Chat for both codes
• ✅ ASUS / Android 10 system camera allows to open Delta Chat for both codes
• ❓ <your test here - or comment below>

what's expected on android is a dialog asking for the app that should be used to open the link (the dialog appears only when delta chat was not set as default before)

[Simon-Laux]

We have already changed the code for contact verification on various devices (like desktop: deltachat/deltachat-desktop#3650), so this would only affect group invite codes.

Also would be great we would let core do the the conversion between the links on all UIs: deltachat/invite#28

[r10s]

We have already changed the code for contact verification on various devices (like desktop: deltachat/deltachat-desktop#3650), so this would only affect group invite codes.

i do not think, this is true. imu, this, and comparable changes, affects the code copied-to-clipboard only or what is shared on android/ios - but then not only for groups but also for secure-join-links.

the suggested change of the issue is about changing the QR code data that is shown in Delta Chat

what's true is that the hacks about copying slightly different data to clipboard or share them, can be removed as the core just always deals with i.delta.chat links (and support openpgp4fpr for legacy reasons)

[Simon-Laux]

the suggested change of the issue is about changing the QR code data that is shown in Delta Chat

good to know that the qr code data was not changed yet. anyways makes sense to not only change the svg, but also the returned qr code data in core and remove the conversion logic from the UI. (so core directly returns the invite links instead of OPENPGP4FPR).

in technical words:

• make both get_securejoin_qr and get_securejoin_qr_svg both return invite links
• detection in core (dc_check_qr) already supports invite links and OPENPGP4FPR
• so then we can remove all conversion logic from the UI's (some code areas are linked in Consider moving invite conversion logic from UI code into core as well invite#28)

[r10s]

anyways makes sense to not only change the svg, but also the returned qr code data in core and remove the conversion logic from the UI.

this is how the change is meant to be. dc_get_securejoin_qr_svg() probably calls dc_get_securejoin_qr(), so only the latter needs to be adapted

[adbenitez]

why do we need the QR data to be a i.delta.chat link???
I think it is better if the QR data is just the needed data to avoid longer QR data (harder to decode QR) or incompatibility with other OPENPGP4FPR:-supporting apps, including old DC clients

for generating the link instead of client-side, a new api "get_invitelink()` could be added 🤔

[r10s]

why do we need the QR data to be a i.delta.chat link???

to allow it being scanned unconditionally, with or without delta chat being installed.

• if you scan it without delta chat installed, you get on the invite link, telling you what to do, where to download etc.

• if you scan it with delta chat installed, nothing changes (nothing is done with i.delta.chat, the server can be offline even)

for the length: it adds 9 characters, that seems a cheap price for the added functionality. for compatibility, see discussion in the initial post

[adbenitez]

to allow it being scanned unconditionally, with or without delta chat being installed.

I just re-read the original post and realized I missed that bit, yes good point I think it is worthy 👍

[gerryfrancis]

Using an up-to-date Google Pixel 8 (Android 14, stock ROM and camera, Firefox browser):

The scan of the first QR code offers to open the link to i.delta.chat in the web browser:

The scan of the second QR code offers to open a OPENPGP4FPR link in an app that is registered to be able to open OPENPGP4FPR links. If there is more than one app installed for that purpose, the user can choose the appropriate one. Choosing Delta Chat leads to this window in it:

[adbenitez]

also for me it made it worse in a Xiaomi device:

the first QR offers to copy text/link to clipboard (not even to open browser!?)

second link offers to open delta chat

on CalyxOS device:

first link offers to open the browser (even if DC is installed, for some reason is not verified that the app can handle the i.delta.chat links)

while the second link offers to copy text to clipboard, not to open directly in delta chat either :(

[missytake]

also for me it made it worse in a Xiaomi device:

the first QR offers to copy text/link to clipboard (not even to open browser!?)

second link offers to open delta chat

same behavior on Redmi 9A (which is Xiaomi I think)

[r10s]

so, all in all it seems a bit questionable, and seems to worsen things on some devices.

it maybe still makes sense to do the change, however, to free up thinking resources, it's no longer needed to be closed for 1.46